Pneumatic Forklifts

Pneumatic forklifts are known as pallet trucks or pump trucks and are commonly utilized in warehouses and delivery facilities to transfer materials on pallets. Pneumatic forklifts comprises a set of steel blades installed on a wheeled counterweight that has a pump. The pump is used to lift and lower the blades.

Visually check the pallet truck before loading. Make sure the wheels are clear of any impending obstacles. In addition, ensure the handle moves easily and turns appropriately. Inspect the pallet before moving it to determine if it is stacked in a manner that minimizes the chance of anything falling off during lifting. Release any air in the pump and drop the blades to the ground by squeezing the lever installed on the inside of the metal loop on the end of the handle. Run the blades into the slots in the pallet and ensure the blades are centered so that the pallets’ weight is evenly spread.

Pump the pneumatic jack handle up and down to raise the forks from the floor. Stop pumping when the pallet is completely off the ground as there is no need to raise it any higher or risk losing balance while turning. In order to move the pallet, haul the handle behind you; you should not push it. There will be a large amount of momentum present. Refrain from quick or sharp turns and do not stop too swiftly. Gently bring the pallet to a stop wherever you would like to park it. Squeeze the lever inside the handle end to return the blades to the floor. Pull out the forks from the pallet and return the pallet truck to its chosen parking spot.

Click to Download the pdf