Grande Prairie Forklift Training Course

Grande Prairie Forklift Training Course - Industry and federal regulators have established the criteria for forklift safety training based on their current regulations and standards. Those wanting to utilize a forklift must finish a forklift training course before making use of one of these equipment. The accredited Forklift Operator Training Program is intended to provide people training with the knowledge and practical skills to become a forklift operator.

Vehicle and Mobile Equipment safety regulations which apply to forklift utilization involve pre-shift inspections, and rules for loading and lifting.

An inspection checklist should be carried out and submitted to the supervising authority before beginning a shift. When a maintenance issue is uncovered, the use of the specific machinery must be stopped until the problem has been addressed. To be able to indicate the equipment is out of order, the keys should be removed from the ignition and a warning tag placed in a visible place.

Loading safety rules consist of checking the rating capacity on the forklift nameplate and determining if the load weight falls within capacity. The forklift forks should be in the down position when the forklift is starting up. Remember that there is a loss of approximately one hundred pounds carrying capacity for every one inch further away from the carriage which the load is carried.

Lifting must begin with the driver moving to a stopped position roughly three inches from the load. The mast must then be leveled until it has reached a right angle with the load. Lift the forks to one inch under the slot on the pallet and drive forward. Next lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk in order to alert other workers. Never allow forks to drag on the ground.

The load must be loaded by the forklift in such a way that ensures the load is secure and would not cause a hazard to other people or objects. Restraining loads is necessary for materials that might shift during transport and destabilize the forklift.

In order to prevent the shifting of drums, drums could be strapped together to reduce movement. Forklift operators must drive slowly when transporting liquids, to decrease instability in the forklift.

Click to Download the pdf